BEGIN:VCALENDAR X-WR-TIMEZONE:US/Eastern DTSTART:20180620T130000 DTEND:20180620T140000 VERSION:2.0 LOCATION:OnlinePRODID:-//Training Doyens //EN METHOD:REQUEST BEGIN:VEVENT UID:20180620T000000-1455489196-example.com DTSTAMP:20180620T000000 DTSTART;TZID="US/Eastern":20180620T130000 DTEND;TZID="US/Eastern":20180620T140000 SUMMARY:Sampling by Variables (ANSI/ASQ Z1.9) DESCRIPTION: ANSI/ASQ Z1.9 (formerly MIL STD 414) uses sample statistics to determine whether a production lot, or incoming lot, should be accepted or rejected. These statistics also allow estimation of the nonconforming fraction at each specification limit. Attendees will learn how to define a sample plan on the basis of (1) the lot size, (2) the inspection level, and (3) the acceptable quality limit (AQL). ANSI/ASQ Z1.9 can be used for single specification limits, two-sided specification limits, and even two-sided limits with different AQLs. Attendees will learn everything they need to know to address all three of these applications. Switching rules meanwhile dictate normal, tightened, or reduced inspection according to production performance. Poor quality results in tightened inspection, while a consistent history of good quality and consistent production conditions allows reduced inspection. In addition, if the process is under control and its standard deviation is known, a considerably smaller sample size is required. PRIORITY:3END:VEVENT END:VCALENDAR